RO Problem Solving

RO problem solving

RO problem solving

RO Problem Solving is a Series of Different Types of Problems that Could be the Reason that the RO System Do Not Want to Functioning Properly.

The RO Problem Solving Specialists.

Ro problem solving is in what we specialize. Every part in the reverse osmosis system has its own way how it works. If one is not working as it is supposed to work then it has a negative effect on the functioning of the entire system. Let’s take a look to some problems and the way to solve it. People or let me rather say the Do-It -Yourself guys tend to take matters in their own hands to solve water system problems. The reverse osmosis system is a complicated system and if you do not know the working of the system by heart. You will make matters only worse.

RO problem solving of the reservoir that have no water in.

  • The inlet water valve is closed or blocked.
  • The reservoir valve is closed.
  • The supply pipeline is bent to prevent water from flowing through.
  • No inlet water pressure.
  • Inlet water pressure is too low.
  • Inlet pressure regulator sticky or not working.
  • House master valve is not working.
  • Reverse osmosis membrane is fouled.
  • Air pressure in holding tank is too high for inlet pressure.
  • The 4 way valve is malfunctioning.
  • Faucet is damaged.
  • Filters are blocked due to dirt and lime in the tap water.
  • High water usage. Reservoir is empty.
  • The membrane is blocked.
  • Membrane water supply is low.
  • Low grade membrane.

RO problem solving of the reservoir that let no water out but is full.

RO Problem Solving

RO problem solving solutions

  • Bladder in reservoir is ruptured.
  • Pipeline is bent to prevent water from flowing.
  • Air in the lower section is depleted.
  • Bladder let air through on the sides.
  • Hole on rusted areas of reservoir.

 

RO problem solving of the reservoir water that smells like sewerage.

  • Wrong installation procedures was followed.
  • Poor workmanship for they do not know what to look for during the installation process.
  • System not used for a month or more.
  • Limited usage of reverse osmosis system.
  • Reverse osmosis membrane is fouled.
  • Waste water pipe line in reservoir supply line.

 

Your Name (required)

Your Email (required)

Cell Number

Your Message